First, avoid adding sugar, urea, superphosphate, or potassium dihydrogen phosphate directly into the main ingredients when mixing. Doing so can lead to uneven nutrient distribution, which negatively affects the yield of edible mushrooms. Instead, these fertilizers should be fully dissolved before being mixed with the main substrate. Gypsum and lime, on the other hand, should be mixed into the bran first and then combined with the main ingredient. This ensures a more uniform and balanced culture medium.
Second, when preparing the growing material and building the pile, avoid using your feet to compress it. This can create anaerobic conditions, which hinder proper fermentation. Instead, let the materials naturally accumulate, and lightly press them down. Insert several small holes in the center of the pile using wooden sticks to allow for better air circulation. Avoid covering the pile with plastic film, as it can trap moisture and reduce airflow. Instead, use breathable materials like straw, burlap sacks, or woven bags to cover the pile.
Third, during sterilization, the mushroom logs should not be packed too tightly. Many growers tend to overfill the sterilizer and pack the logs too tightly, which can prevent steam from circulating properly. This often leads to longer sterilization times—sometimes up to 30 hours—which is unnecessary. In reality, the logs should be placed loosely enough so that once the temperature reaches 100°C, the fire can be maintained for about 10 hours. After that, add a bit of coal, drill a few holes, and let it sit overnight for optimal sterilization.
Fourth, when inoculating, make sure the sealing paper is fumigated to ensure a sterile environment. The bacterial rings and rubber seals should also be soaked in disinfectant. When using formaldehyde, potassium permanganate, or an aerosol box for fumigation, it's crucial to use the correct dosage. If the concentration is too low, the disinfection process will be ineffective, increasing the risk of contamination.
Fifth, when using bagged spawn, always clean the surface of the spawn to remove any excess bacteria. For bottled spawn, each bottle should be used individually. After finishing one bottle, all tools must be re-sterilized before proceeding to the next one. Never place the spawn in boxes for inoculation, as this can introduce contaminants and compromise the entire batch. Always maintain a clean and controlled environment throughout the process to maximize success.
Power Drill
Orthopedic electric drill is suitable for trauma surgery, our company mainly has Multifunctional Drill Saw System, electric drill,cannulated drill, High Torgue Acetabular Reamer Drill,Craniotomy Drill and so on.
Attention
1, Medical bone drill is a short-time operation product, each use time of 10 minutes, can not be used continuously for a long time.
2, The battery is strictly prohibited high temperature, high pressure disinfection, after the operation should be taken out of the battery from the medical bone drill, into the packaging box, if not used for a long time, should not be charged and discharged once, so as to avoid plate aging.
3,The charger power cord can not receive oil, chemical solution erosion and mechanical damage.
4, Master the function of the device and the correct installation and use of the method, pay attention to maintenance, only properly maintained, in order to extend the service life, so that expensive medical equipment to use longer.
Power Drill,Orthopedic Drill,electric drill,bone drill
Jiangsu Aomed Ortho Medical Technology Co.,Ltd , https://www.aomedortho.com