Vertical vibration incubator / full temperature shaker technical information

First, the product introduction
BS-2FD vertical full-temperature culture shaker (oscillator) is a new type of laboratory equipment newly introduced by our company, which is widely used in plants, biology, microbiology, genetics, viruses, medicine, environmental protection, food, petrochemicals. And other research and production departments. The utility model is characterized in that the volume of the box body is large, the foaming material of the partition box body is used, the heat preservation performance is good , the air circulation device unique in the cavity makes the temperature in the cavity uniform, and the special microcomputer temperature control device makes the temperature control precision higher. standard.
Second, technical parameters
1. Dimensions: 1180 × 720 × 700mm .
2 , capacity: 48 × 250ml or 40 × 500ml .
3 , temperature control: 5 ~ 50 °C, microcomputer intelligent temperature control, with constant temperature compensation; accuracy: ± 0.5 °C, waviness: ± 1 °C.
4 , motor power: 400W ; heating power: 600W ; cooling power: 268W .
5 , oscillation speed: start ~ 280rpm , speed digital display; amplitude: 30mm , convoluted.
6 , power: 220V , 50Hz .
7 , glass observation door, built-in lighting system.
8 , material: shell cold plate electrostatic spray, the liner is high-quality stainless steel, the bottle clip uses a one-time forming stainless steel fixture or universal stainless steel spring clamp (optional), the whole machine looks beautiful and generous.
Third, the operating instructions
1. Plug in the power cord, turn on the power switch, open the cover, place the container in the appropriate fixture, and then close the cover.
2. Turn on the corresponding oscillation switch and adjust the speed to the desired speed.
3. If you need to control the temperature, you can turn on the temperature control and set the required temperature on the temperature controller. For the operation instructions of the temperature controller of the machine, please refer to the operation manual of the temperature controller.
4. When using, first adjust the oscillation speed to zoi low and turn off each group of oscillation switch and temperature control switch, then turn off the main power supply.
5. The local timer is generally set to the ON position (ie, the normally open position). If you need to use the timing function, you can adjust the timer to the desired position. When the timer is finished, the unit is turned off.
Fourth, troubleshooting
1. If the unit cannot be started after turning on the power, check whether the power switch indicator is on. If the power indicator is on, check whether each group of oscillation switches is turned on and the governor is working. If the power indicator is off, check it. Is the fuse behind the unit intact and the plug plugged in?
2. If the temperature cannot be controlled, check whether the temperature control switch is turned on. If the temperature control switch is turned on, check whether there is a digital display on the temperature controller and whether the temperature control setting is correct.
3. If it is impossible to illuminate, check if the light switch has been turned on and the lamp is broken. If the lamp is broken, just replace it with a new one.
4. If you are unable to find out the problem, please contact our company directly, and do not open the instrument by yourself.
Weir Suzhou Lab Supplies Company Limited is a large-scale equipment manufacturing professional manufacturers in Jiangsu Province.
The main products are: hot and cold cycle instrument, low temperature thermostat, constant temperature oscillator, shaker, biochemical incubator, light incubator, shaking incubator, mold incubator, electric thermostat incubator, water-proof incubator, water bath / gas Bath shaker, water bath, oil bath, super constant temperature water bath, multi-function oscillator, desktop centrifuge, electric heating plate and other series of more than 100 products.

:

:,65554768

: Storage

;

Honghui capsule produces gelatin hollow capsule in large scale with well-equipped facilities.


The gelatin hollow capsule is a shell with special color and shape, made of the main raw material of gelatin. It is always used as special packaging of medicines or health care products which have bad smell, light sensitive of unstable,.


The capsules do not need adhesives and numerous excipients during the production process, easy to disintegrate and release in gastric juice.


The capsule can improve the bioavailability compared with tablet and pill. Meanwhile, it has some other avantages such as accurate dosage, convenient carrying and safe sealing.

Size 3 Gelatin Empty Capsules

Empty Hard Gelatin Capsules,Empty Capsules Size 3,Empty Gelatin Capsules Size 3,Size 3 Gelatin Empty Capsules

Zhejiang Honghui Capsule Co.,Ltd , https://www.hhcapsule.com